Cement board is considered the common building material. It can be installed on the floors, walls and backsplashes under the tiles. The main purpose of this board is to support tiles and avoid cracking. It is why the boards are also known as backer boards and cement boards.
You may find this material in any store, such as Planet Eco. However, the material is more costly than drywall, so it is a worthy investment. The dimensions of this board are 3 x 5 ft, which is better for showers and bathtubs.
What is Cement Board Made Of?
These boards are made with silica, fibreglass, cement and water due to more strength. The boards are not like wood and drywall. So these don’t have the organic materials. As a result, the boards can resist mould and rot.
But before investing in buying cement boards, you must know why people use gypsum boards. Read the Planet ECO guide about the benefits people can avail of by using the gypsum board. However, It is essential to keep the boards and allow the materials to dry. Then, a waterproof membrane should be applied to the board top. As a result, it can work better in wet areas such as bathrooms.
Why You Should Use Cement Board in Bathroom?
Cement boards are useful materials because they offer strength and support. You may apply these boards to the wood floor. So it can make way for newer tiles. Also, you may install them on the countertops and cabinets. Other than this, boards can be installed on the walls, which ensures the application of plaster. In simple cement, boards are easy to apply in the interior and exterior.
Cement boards act as the sheathing material for walls and floors. Other than this, it can also be used as a sub-material in bathrooms and kitchens.
The boards can resist water but are not waterproof. It means boards require waterproofing. Before installing the tiles, it is crucial to seal all screws and cracks. It is also better to seal large, flat areas. This way, you can avoid water entry through the boards in the walls. Otherwise, the water entry may cause rot, mould and mildew growth.
How to Install Cement Board?
The installation process of cement board is very simple and the same as drywall. At first, there is a need to install the vapour barrier on the surface as boards are famous for their fast drying time and water absorption. So, it is good to protect the board from mildew and mould growth.
Then, you have to apply the adhesive mortar on the surface. Then, the board is to be attached to the wall and floor. For this, you can use ring shank nails and screws. Ensure to fit the screw slightly in the wall. Also, ensure that gaps of 1/8 inches are kept between boards. It is crucial for expansion due to heat.
However, when do you have to install it above the bath? Then, ensure to keep gaps of ¼ inches between tubs and boards. So it can avoid moisture wicking once you nail all the boards to the surface. Then, you have to fill the joints with silicon compounds that can resist water. Now, you can install tiles on cement boards.
Conclusion:
Cement board is famous as the best material. As the material is stiff and strong, it is much more useful. Other than this, it is a great material for tiles and slabs. However, you need to apply the waterproof layer. Then, install the board on the wall or floor.
Suppose water enters and reaches the home wood. Then, it may cause mould growth and deterioration. For this, a waterproof layer is necessary to stop water penetration. Contact one of the leading companies, Planet ECO, to buy the best quality cement boards now!
