How to Fix Gypsum Board Like a Pro

Gypsum board, which is also called plasterboard or plasterboard, is a must-have for building in the UAE. It is often used in Dubai villas, Abu Dhabi workplaces and Sharjah flats. It is still a popular choice for both homes and businesses since it is cheap and has a smooth surface. But over time, things can get damaged, especially in places with high humidity.

What do you think? You don’t have to be a contractor to fix anything. Even if this is your first DIY job, PlanetEco can help you fix gypsum board like an expert.

With the help of PlanetEco’s experts, this tutorial will show you how to fix cracks, holes, and water damage using materials that are easy to find in the UAE.

Understanding Gypsum Board Damage

What is Gypsum Board?

Gypsum board is a panel made from calcium sulphate dihydrate (gypsum), layered between two sheets of durable paper. It’s fire-resistant, quick to install, and commonly used for interior walls and ceilings. However, it can be prone to cracks, dents, and water damage if not maintained properly.

For high-quality gypsum board products, PlanetEco Gypsum Board supplier offers a wide range of eco-friendly and durable options tailored for the UAE’s climate.

Common Causes of Damage in UAE Properties

  • High indoor humidity or plumbing leaks
  • Accidental impacts (moving furniture or fixtures)
  • Weak initial installation
  • Building settlement or structural shifts
  • Mould formation due to poor ventilation

Tools & Materials (Available at PlanetEco UAE)

Tools

  • Utility knife
  • Taping knife
  • Sanding block
  • Drill or screwdriver
  • Putty knife
  • Drywall saw

Materials

  • Joint compound (also known as gypsum plaster)
  • Drywall tape (mesh or paper)
  • Replacement gypsum board sheets
  • Screws or nails
  • Safety gear: gloves, goggles, and a dust mask
  • Primer and paint

Safety First in UAE Settings

  • Turn off the power at nearby outlets before cutting.
  • Use a drop cloth to protect floors and furniture.
  • Always wear a dust mask and goggles while sanding.
  • Work in a well-ventilated area.

Fixing Minor Cracks – Step-by-Step

  1. Wipe the crack clean with a damp cloth.
  2. Slightly widen it using a utility knife.
  3. Cover with drywall tape.
  4. Apply joint compound with a taping knife.
  5. Let it dry for 24 hours.
  6. Sand, apply a second coat, sand again.
  7. Prime and paint.

Repairing Holes in Gypsum Board

Small Holes

  • Fill with spackling paste.
  • Smooth with a putty knife.
  • Sand and paint when dry

Medium Holes (2–6 inches)

  • Cut a clean patch.
  • Insert a back brace.
  • Screw the patch in, tape, apply joint compound, then sand and paint.

Large Holes (6+ inches)

  • Cut out the damaged section to the nearest studs.
  • Replace with a new gypsum board.
  • Finish as above.

Tip: For large repairs, consider using a full kit from PlanetEco, trusted for professional-grade drywall supplies across the UAE.

Fixing Water-Damaged Gypsum Board

  1. Find and fix the water source.
  2. Remove the damaged drywall.
  3. Inspect for mould.
  4. Let the wall cavity dry.
  5. Replace with new gypsum board.
  6. Tape, compound, and paint.

Use mould-resistant boards from PlanetEco Gypsum Board supplier to avoid future issues, especially in bathrooms or kitchens.

Dealing with Mould

  • Wear gloves and a mask.
  • Remove mould-affected drywall.
  • Clean nearby areas with diluted bleach.
  • Dry the space completely.
  • Install mould-resistant gypsum board.

Sanding & Finishing

  • Let the joint compound fully dry.
  • Sand with 120–150 grit paper.
  • Wipe away dust.
  • Apply primer before painting.

Pro Tips from PlanetEco UAE

  • Use mesh tape to avoid bubbling.
  • Feather joint compound for a seamless blend.
  • Always prime before painting.
  • Avoid over-sanding to keep the tape intact.

Preventing Future Damage in the UAE

  • Use moisture-resistant drywall in high-humidity areas.
  • Install corner guards in corridors.
  • Regularly check the plumbing.
  • Mount heavy items into wall studs.
  • Keep indoor humidity between 30–50%.

Final Thoughts

You don’t have to pay much money to fix the gypsum board. PlanetEco gives you step-by-step instructions and reliable supplies so you can fix cracks, holes, or water damage in your UAE house or business with confidence.

Are you looking for plasterboard products in the UAE that are good for the environment, dondon’tt mouldy, or dondon’tt wet? PlanetEco is the place to go for eco-friendly, long-lasting building solutions.

Leave a Reply

Your email address will not be published. Required fields are marked *